 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| KTE6000 / KTU6000 Series OEM pressure transmitters for industrial media FEATURES * 0...-1 to 0...400 bar 0...-15 to 0...6000 psi gage1 or absolute * For many industrial gases and liquids * 0...10 V, 0.5...4.5 V, 0...5 V and 4...20 mA output * Field interchangeable * For industrial use MEDIA COMPATIBILITY Wetted materials: stainless steel 1.4404 (316L), ceramic Al2O3, NBR9, TPE9 Housing: stainless steel, protection class IP 65 (according to DIN EN 60529) respectively NEMA 4X1 SPECIFICATIONS11,12 Maximum ratings ELECTRICAL CONNECTION 0...10 V, 0.5...4.5 V, 0...5 V output Supply voltage (reverse polarity protection) KTx6...0 12...30 V KTx6...6, KTx6...7 9...30 V KTx6...42 9...30 V Maximum load current (source) KTx6...0, KTx6...6, KTx6...7 Temperature limits Storage Operating Compensated Humidity limits Vibration (5 to 500 Hz) Mechanical shock Proof pressure3 400 bar (6000 psi) all others December 2008 / 550 +Vs 1 Vout 3 -Vs 2 12 (9) to 30 V sensor V 1 mA GND -55 to 100C -40 to 100C 0 to 70C 0 - 95 %RH 10 gRMS 50 g 4...20 mA output +Vs 1 N/C 3 -Vs 2 9 to 30 V sensor V RL GND 1.5 x rated pressure 2 x rated pressure 1/6 www.sensortechnics.com KTE6000 / KTU6000 Series OEM pressure transmitters for industrial media COMMON PERFORMANCE CHARACTERISTICS VS = 15 V, RL > 100 k, tamb = 25C Characteristics Operating pressure KTE6001... KTE6N01G... KTE6P01G... KTE6002... KTE6005... KTE6010... KTE6016... KTE6020... KTE6025... KTE6035... KTE6050... KTE6070... KTE6100... KTE6150... KTE6200... KTE6300... KTE6400... KTU6015... KTU6N15G... KTU6P15G... KTU6030... KTU6050... KTU6100... KTU6200... KTU6300... KTU6500... KTU61K0... KTU61K5... KTU62K0... KTU63K0... KTU64K5... KTU66K0... Offset Span Offset Span > 200 bar (3000 psi) all others Min. 0 -1 -1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -15 -15 0 0 0 0 0 0 0 0 0 0 0 0 Typ. Max. 1 1 0 2 5 10 16 20 25 35 50 70 100 150 200 300 400 15 15 0 30 50 100 200 300 500 1000 1500 2000 3000 4500 6000 0.05 0.05 Unit bar p si Thermal effects (0 to 70C)4 Thermal effects (-40 to 0C, 70 to 100C) Non-linearity, hysteresis (BSL) and repeatability5 Long term stability6 Output noise (0 < f < 1 kHz) Response time (10 to 90 %) Power supply rejection 0.02 0.02 0.03 0.03 0.2 0.1 0.3 0.04 1 %FSO/C 0.4 0.3 %FSO 5 ms %FSO/V Offset Span KTx6...0, ...6, ...7 KTx6...4 KTx6...0, ...6, ...7 KTx6...4 0.002 0.05 0.002 0.08 December 2008 / 550 2/6 www.sensortechnics.com KTE6000 / KTU6000 Series OEM pressure transmitters for industrial media INDIVIDUAL PERFORMANCE CHARACTERISTICS 0...10 V output (VS = 15 V, RL > 100 k, tamb = 25C) Characteristics Zero pressure offset Full scale span7 Output impedance Current consumption (no load) KTx6N... all others KTx6N... all others Min. 4.9 4.9 9.9 Typ. 5 0.03 5 10 Max. 5.1 0.1 5.1 10.1 25 Unit V mA 3 5 0.5...4.5 V output (VS = 15 V, RL > 100 k, tamb = 25C) Characteristics Zero pressure offset Full scale span7 Output impedance Current consumption (no load) KTx6N... all others KTx6N... all others Min. 2.450 0.450 1.950 3.950 Typ. 2.5 0.5 2 4 Max. 2.550 0.550 2.050 4.050 25 Unit V mA 3 5 0...5 V output (VS = 15 V, RL > 100 k, tamb = 25C) Characteristics Zero pressure offset Full scale span7 Output impedance Current consumption (no load) KTx6N... all others KTx6N... all others Min. 2.45 2.45 4.95 Typ. 2.5 0.03 2.5 5.0 Max. 2.55 0.08 2.55 5.05 25 Unit V mA 3 5 4...20 mA output (VS = 15 V, RL = 100 , tamb = 25C) Characteristics Zero pressure offset Full scale span7 Power consumption (IL = 20 mA) KTx6N... all others KTx6N... all others Min. 11.9 3.9 7.9 15.9 Typ. 12.0 4.0 8.0 16.0 250 Max. 12.1 4.1 8.1 16.1 Unit mA mW December 2008 / 550 3/6 www.sensortechnics.com KTE6000 / KTU6000 Series OEM pressure transmitters for industrial media OUTPUT CHARACTERISTICS 0...10 V output version 10 Vout V9 8 7 6 5 4 3 2 1 -100 -80 -60 -40 -20 0 +20 +40 +60 +80+100 % operating pressure KTx6P... all other KTx6N... 0.5...4.5 V output version 10 Vout 9 V 8 7 6 5 4 3 2 1 -100 -80 -60 -40 -20 0 +20 +40 +60 +80+100 % operating pressure KTx6P... all other KTx6N... 0...5 V output version 10 Vout V9 8 7 6 5 4 3 2 1 -100 -80 -60 -40 -20 0 +20 +40 +60 +80+100 % operating pressure all other KTx6P... KTx6N... 4...20 mA output version 20 Iout 18 mA 16 14 12 KTx6P... 10 8 6 4 2 -100 -80 -60 -40 -20 0 +20 +40 +60 +80+100 % operating pressure all other KTx6N... LOAD LIMITATION 4...20 mA output version 1400 Ohm 1200 1000 800 op e ra ratin ng g e RECOMMENDED ACCESSORY Plug DIN EN 175301-803 A and profile washer included in delivery. For a complete connector/cable assembly use order no. ZK000110-x (x=cable lenghts in m). 50 34 600 400 200 0 5 9 Profile washer M3 31 16 20 25 30 V supply voltage dimensions in mm Note: For proper function of all gage devices the gage port must be vented to the atmosphere through the connector/cable assembly. 4/6 December 2008 / 550 www.sensortechnics.com KTE6000 / KTU6000 Series OEM pressure transmitters for industrial media OUTLINE DRAWING KTE6...T 4.5 (0.18) HEX 27 (1.06) G1/2" (1/2" BSP) 23 (0.90) 17 (0.67) 8.5 (0.33) 27.0 (1.06) diam. NOM 68 (2.68) 12 (0.47) vent hole 3 6.0 2 1 KTE6...Q 4.5 (0.18) HEX 27 (1.06) 12 (0.47) NOM 68 (2.86) 8.5 (0.33) G1/4" (1/4" BSP) 27.0 (1.06) diam. 12 (0.47) vent hole 3 2 1 KTE6...L 4.5 (0.18) HEX 27 (1.06) 17 (0.67) NOM 68 (2.68) 8.5 (0.33) 27.0 (1.06) diam. 12 (0.47) vent hole 3 1/4"NPT 2 1 KTE6...O (flush mount) 12 (0.47) 13 (0.51) NOM 68 (2.68) 8.5 (0.33) 12 (0.47) vent hole 3 Hex 32 (1.26) 27.0 (1.06) diam. G3/4" 2 1 mass: 210 g December 2008 / 550 dimensions in mm (inches) 5/6 www.sensortechnics.com KTE6000 / KTU6000 Series OEM pressure transmitters for industrial media ELECTROMAGNETIC CAPABILITY8 Test conditions EN61000-4-3: Grade 3, 10 V/m, 80 to 1000 MHz 80 % AMC (1 kHz) Electrical fast transient / burst immunity (EFT) EN61000-4-4: Grade 3, 2 kV Radiated, radio frequency electromagnetic field immunity (RFI) Electrostatic discharge immunity test (ESD) Immunity to conducted disturbances induced by radio-frequency fields EN61000-4-2: Grade 4, 8 kV, contact discharge EN61000-4-6: Grade 3, 0.15 to 80 MHz 10 V, 80 % AMC (1 kHz) Criterion A B B A Interference <1 %FSO <1 %FSO <1 %FSO <1 %FSO Specification notes: IP 65 protection is given when the connector is locked with a rubber washer. For proper function the gage port is vented to the atmosphere through the connector/cable assembly. Thus the cable end must have access to the ambient pressure. 2. The minimum supply voltage is directly proportional to the load resistance seen by the transmitter. For more details see the load limitation diagram. 3. Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element. 4. Thermal effects tested and guaranteed from 0 to 70C relative to 25C. All specifications shown are relative to 25C. 5. Non-linearity refers to the Best Straight Line fit measured for offset, full scale span and 1/2 full scale span. 6. Long term stability is the change in output after one year or 1 million pressure cycles. 7. Span is the arithmetic difference in transmitter output signal measured at zero pressure and the maximum operating pressure. 8. Test are in accordance with EN61000-6-2, April 1999. 9. Other sealing materials on special request. 10. Other fittings on special request. 11. CE-labelling is in accordance with 89/336/EEC. 12. The pressure transmitters must not be used as safety accessories according to article 1, 2.1.3 of the directive 97/23/EC. 1. ORDERING INFORMATION KTx6 E: bar calibration U: psi calibration KTE6000 series 001: 0 to 1 bar N01: -1 to +1 bar P01: -1 to 0 bar 002: 0 to 2 bar 005: 0 to 5 bar 010: 0 to 10 bar 016: 0 to 16 bar 020: 0 to 20 bar 025: 0 to 25 bar 035: 0 to 35 bar 050: 0 to 50 bar 070: 0 to 70 bar 100: 0 to 100 bar 150: 0 to 150 bar 200: 0 to 200 bar 300: 0 to 300 bar 400: 0 to 400 bar KTU6000 series 015: 0 to 15 psi N15: -15 to +15 psi P15: -15 to 0 psi 030: 0 to 30 psi 050: 0 to 50 psi 100: 0 to 100 psi 200: 0 to 200 psi 300: 0 to 300 psi 500: 0 to 500 psi 1K0: 0 to 1000 psi 1K5: 0 to 1500 psi 2K0: 0 to 2000 psi 3K0: 0 to 3000 psi 4K5: 0 to 4500 psi 6K0: 0 to 6000 psi xxx x x x Output signal 0: 4: 6: 7: 0...10 V 4...20 mA 0.5...4.5 V 0...5 V Fitting size10 L: O: Q: T: 1/4" NPT male G 3/4" (3/4"BSP) only up to 16 bar/200 psi G 1/4" (1/4" BSP) male G 1/2" (1/2" BSP) Pressure mode G: S: A: gage pressure 1 (up to 50 bar/750 psi) sealed gage (above 50 bar/750 psi absolute pressure (up to 50 bar/750 psi) Note: Other pressure ranges and options are widely available. Please contact your nearest Sensortechnics sales representative. Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. December 2008 / 550 6/6 www.sensortechnics.com |
Price & Availability of KTE6002SO7
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |